Table of Contents
Advertisement
Available languages
Available languages
Battery Installation for the Remote Control
1.
Press and hold the battery release tab in the
direction of arrow
2.
Pull out the battery holder completely in the
direction of arrow
3.
Place a new CR2025 battery in the holder.
GB
4.
Push the holder back into the remote control.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with the
local regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed
by young children and this is dangerous. Keep loose button cells away from young children
and make sure that the battery holder tray is secure in the remote control. Seek medical
advice if you believe a cell has been swallowed.
• If you are not going to use the unit for a long time, remove the battery to avoid damage
from battery leakage and corrosion.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it
could cause corrosion or battery leakage and may result in physical injury and/or property
damage including fire.
10
.
1
.
2
Install the battery correctly by following the polarity (+ and -) indications in
the battery compartment.
CR2025
2
1
Advertisement
Table of Contents
