Culligan Premier Series Installation, Operation And Service Instructions page 97

Test Modem
This menu attempts to send a test message. The screen indicates whether or not this process is successful. Sending a
test message will also update the time and date on the deionizer controller to the correct time. This testing process will
also check to see if there is an updated version of firmware available on the Culligan servers.
After conducting a phone line test, it is important to verify that the new time and date settings on the controller are correct.
If the new time setting has the incorrect value for the hours it is likely that the time zone setting on the control is incorrect.
SERVICE
FEB-01-13 12:11P
10.0GPM 161PPM
3)SET DATE/TIME
4)ADV. SETUP
5)ACCESSORIES
>6)DIAGNOSTICS
1)MANUAL CONTROL
2)CHECK INPUTS
>3)TEST PHONELIN
4)TEST PROGFLOW
MODEM TEST
Emailing now
Please Wait...
Possible Results
MODEM TEST ERROR
NO TONE!!
MODEM EMAIL
SUCCESS
Cat. No. 01024000
1. From the default home screen, press
2. From the main menu screen, press
3. Press . The screen displays the Diagnostics menu.
4. Press and
5. Press any key to begin the test. The controller returns to the home screen during
the test.
MODEM TEST
NOT POSSIBLE NOW
TRY LATER!
MODEM TEST
TIME
SET SUCCESS
to display the main menu.
to select 3) TEST PHONELIN.
MODEM TEST ERROR
ANSWER TIMEOUT
to 6)DIAGNOSTICS.
Optional Accessories 93