Test Communication Between Circuit Boards (TEST PROGFLOW)
The Test Progflow diagnostic verifies communication between the two systems in an alternating flow system.
SERVICE 1
STANDBY 2
FEB-01-13 12:11P
3)SET DATE/TIME
4)ADV. SETUP
5)ACCESSORIES
>6)DIAGNOSTICS
1)MANUAL CONTROL
2)CHECK INPUTS
3)TEST PHONELIN
>4)TEST PROGFLOW
PROGRESSIVE TEST
Rx:0027
Tx:0027
PROGRESSIVE TEST
RCVD: 0000
SERVICE 1
STANDBY 2
FEB-01-13 12:11P
Culligan® Premier Series Automatic Deionizer
44
1.
From the default home screen, press
2.
Press
tion and settings.
3.
Press
to select 4)TEST PROGFLOW.
4.
The screen displays the communication status shown on the master system be-
tween the master and slave systems. Both numbers should be increasing in value
for the transmitter and receiver to verify that communication is working. Press any
key to view the next diagnostic screen. Refer to step 5 for the slave system screen
display.
5.
The screen displays the communication status shown on the slave system be-
tween the master and slave system. This screen occurs at the same time as the
screen in step 4.
6.
The controller automatically returns to the home screen after a few moments.
to display the main menu.
to select 6) DIAGNOSTICS, the diagnostics informa-
Cat. No. 01024000
44