Deionizer Wiring - Culligan Premier Series Installation, Operation And Service Instructions

Notes
1. Install all black leads from items 13 and 14 (solenoid valves) onto item 9 (screw leads on panel to any terminal as they are all
common).
2. Install all white leads from items 13 and 14 onto items 5 and 6 in the locations shown.
3. Install black lead wire from item 14, locations A6, AP, C5, and CP, onto item 17.
4. Install the five-pin connector end from item 7 into item 2 with the black wire located in gnd location.
5. To convert the power supply for the unit from 120 VAC to 208-230 VAC or 240 VAC, rewire the item 1 as shown above.
6. Install the phone jack connector end into Port #2 on item 5.
Cat. No. 01024000
Figure 13.
Deionizer wiring, single.

Deionizer Wiring

Deionizer Wiring 27