Deionizer Controller Programming - Culligan Premier Series Installation, Operation And Service Instructions

Program Data Input
There are a few items to note to help you program the Culligan® Premier Series Automatic Deionizer.
Slew Rates This term refers to the speed at which the display moves through the input of material. For ex-
ample, holding down
the number faster. Pressing the
slow the rate.
Programming Mode If there is no keypad activity for a one-minute period while in programming mode, the deion-
Timeout izer controller will exit programming mode and display the home screen. Any setting that was
changed prior to the controller timing out will revert to its original value. Press
setting.
Program Input
Press
Acceptance
accept a selected setting value. (You must press
Menu Lockout
It is possible to lock the keypad of the Premier Series Automatic Deionizer controller so that users will have access only to
the MANUAL REGEN, SET DATE/TIME, and DIAGNOSTICS menus.
SERVICE 1
LOCKED
JAN-01-11 12:01P
SERVICE 1
UNLOCKED
JAN-01-11 12:01P
NOTE Menu lockout may only be completed from the home screen.
Cat. No. 01024000

Deionizer Controller Programming

for five (5) seconds when changing the Set Hour setting will increment
to select a value to make it changeable,
The system can be locked from the home screen. Press
and holding them down for 10 seconds until you see the word LOCKED.
Repeating this process will unlock the keypad.
or for shorter intervals (fewer than five (5) seconds) will
or to change, and press
prior to programming mode timeout.)
Deionizer Controller Programming
to save the
again to
and simultaneously
29