A5E00131465 - Siemens SIMATIC Box PC 620 Manual

Preface
Purpose of the Manual
This manual contains all the information you need for commissioning and using the
SIMATIC Box PC 620.
It is intended both for programming and testing/debugging personnel who
commission the device itself and connect it with other units (automation systems,
further programming devices) as well as for service and maintenance personnel
who install expansions or carry out fault/error analyses.
Where is this Manual Valid?
This manual is valid for all supplied variations of the SIMATIC Box PC 620 and
describes the state of delivery as of April 2004.
Certifications, Standards and Approvals
Certifications
The device fulfils the following guidelines and certifications:
S EU guideline 73/23/EEC on low voltages
S EU guideline 89/336/EEC on electromagnetic compatibility
S Underwriters Laboratories (UL) to Standard UL 1950 or UL 508
S Canadian Standard Association (CSA) to Standard C22.2 No. 950 or No. 142
Standards and Approvals
The device fulfils the requirements for the CE approval. Approvals for UL and CSA
are available.
Further information on the approvals, certificates, and licenses for your device is
provided in Chapter 1.
Incorporation into the Communications Environment
This manual forms part of the supplied CD "Documentation and Drivers".
For supplementary instructions on how to handle the software please refer to the
corresponding manuals.
SIMATIC Box PC 620 Manual

A5E00131465-03

www.aotewell.com
sales@aotewell.com
Industry Automation
iii
+86-755-8660-6182