Overview Of The Components And Ports - Siemens SIMATIC Box PC 620 Manual

7.2

Overview of the Components and Ports

Component/Port
Chipset VIA PN133T
BIOS Update via software
CPU Pentium III / Celeron (type FC-PGA370)
Memory DIMM modules
up to max. 512MB/DIMM
Graphics UXGA LCD Controller on the AG Bus is
integrated Chip set (S3)
Hard Disk ATA-33 mode
CD ROM Master on secondary EIDE port
CD RW/DVD Master on secondary EIDE port
Floppy Notebook port for 34 pin flat cable
Keyboard Port for PS2 keyboard
Mouse PS2 mouse port
Serial COM1/25 pins
COM2/9 pins.
2
TTY * Communication with SIMATIC S5-CPUs
Parallel Standard, bidirectional, EPP and
ECP mode
SIMATIC Box PC 620 Manual
A5E00131465-03
www.aotewell.com
Description
sales@aotewell.com
Hardware Information
Parameters
S
SDRAM
S
512K in 4 pages
S
Upgradeable
S
Multimedia support
S
On Board L2-Cache with 128 k/256 k
/512 K
S
Data capacity of 64 bits
S
3.3 V
S
SDRAM to PC133 specification
S
up to 256MBit chip size on the
module
S
100/133MHz bus speed
S
2 DIMMs can be used
S
easy to exchange
S
variable from 64-512MB/DIMM
S
up to 32 Mbytes of SDRAM are part
of the main memory and can be
configured (8/16/32MB)
S
CRT:
up to1600x1200/85Hz 65536 colors
with PC133 memory modules
up to1280x1024/85Hz 65536 colors
with PC100 memory modules
S
Ultra DMA capable
S
24 speed
Multi Spin Writer Drive
S
Read: CD ROM, CD R 14-32 times,
CD RW 8-20 times Speed, 8 times
S
Write: CD R 12 times,
CD RW 10 times Speed
suppors recording:
S
Disc at once, Track at once,
Session at once, Packet writing
S
1.44 MB
S
Standard
S
Standard
S
2
TTY * and V24
S
Standard
S
Range up to 1000 m
S
25 pin subminiature Cannon
connector
Industry Automation
7-3
+86-755-8660-6182