Opening The Simatic Box Pc 620 - Siemens SIMATIC Box PC 620 Manual

SIMATIC Box PC 620 Expansions
4.1.2

Opening the SIMATIC Box PC 620

To open the Box PC, proceed as follows:
1. Pull out the power supply connector, and remove all connecting cables from the
unit, including the keyboard cable.
2. Remove the PC from its mounting/cabinet (only necessary if screws which have
to be removed are inaccessible in the fitted position).
3. Undo the two screws (see fig. 5-1) on the housing cover.
4. Raise the cover slightly.
5. Then you can remove the housing cover.
Figure 4-1 Box PC 620 Prepared for Opening
4-4
www.aotewell.com
Screws on the housing cover
sales@aotewell.com
Industry Automation
SIMATIC Box PC 620 Manual
A5E00131465-03
+86-755-8660-6182