Siemens SIMATIC Box PC 620 Manual page 162

Hide thumbs Also See for SIMATIC Box PC 620:
Table of Contents

Advertisement

Hardware Information
2.5" hard disks
CD ROM
TTY transmitter/
*
receiver
PS connection
for 3.5" hard
disk
PS connection
for CPU fan
PS connection
for device fan
Backup battery
*
Optional product feature
Port to the Bus Unit
The Box PC has a bus unit with a PCI slot and a shared ISA/PCI slot. Expansion
cards can be installed to ISA specification (Rev. 3.1) and PCI specification
(Rev. 2.0) with a maximum length of 265mm (175 mm for shared ISA/PCI
modules). All the PCI slots can be used as masters. For Box PCs with the 85W
power supply only 5V PCI modules are operable.
The bus unit is executed as a purely passive module, i.e. there are only socket
contacts for the expansion cards and any necessary backup capacitors. The power
supply to the expansion cards is effected via the connection of the bus unit with the
basic board. The -5V voltage is not provided for in the power supply and is
produced from the -12V on the bus unit via in-phase voltage control.
7-28
www.aotewell.com
internal
X4
170h-177h, 1F0h-1F7h, can be disabled
IRQ14, IRQ15, edge-triggered
44 pin, 2mm male connector (2.5" HD,
primary),
a maximum of two drives are operable
internal
X3
170h-177h, 1F0h-1F7h, can be disabled
IRQ14, IRQ15, edge-triggered
44 pin, 2mm male connector
internal
X70/71
Connection for TTY transmitter/receiver
hybrid (physical interface)
internal
X25
Power supply for 3.5" hard disk,
4 pin, male connector
internal
X29
Power supply for CPU fan,
3 pin, male connector
internal
X28
Power supply for device fan,
2 pin, male connector
internal
X24
Power supply for device fan,
2 pin, male connector
sales@aotewell.com
Industry Automation
SIMATIC Box PC 620 Manual
A5E00131465-03
+86-755-8660-6182

Advertisement

Table of Contents
loading

Table of Contents