Operation Mode; Wireless Router Mode; Access Point Mode; Range Extender Mode - TP-Link AC750 User Manual

Chapter 4
4. 3.

Operation Mode

The router supports three operation modes: Wireless Router mode, Access Point mode
and Range Extender.
4. 3. 1.

Wireless Router Mode

The default Wireless Router mode is required most commonly. In this mode, the device
enables multiple users to share the internet connection via ADSL/Cable Modem.
For hardware connection, refer to
4. 3. 2.

Access Point Mode

In this mode, the device can be connected to a wired network and transform the wired
access into wireless one. If you already have a wired router, you can use this mode.
Refer to Configure the Router in Access Point Mode
4. 3. 3.

Range Extender Mode

In this mode, the device can copy and reinforce the existing wireless signal to extend
the coverage of the signal, especially for a large space to eliminate signal-blind corners.
Refer to Configure the Router in Range Extender Mode
4. 4.

Network

4. 4. 1.

WAN

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > WAN.
3. Configure the IP parameters of the WAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
Connect Your Router.
session for detailed information.
Configure the Router
session for detailed information.
Dynamic IP, and the router will
15