Chapter 5
Done!
Now only client A and client B can access your network.
5. 6. 5.
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Wireless
>
Wireless
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
•
Transmit Power
- Select High,
router.
High
is the default setting and recommended.
•
Beacon Interval
- Enter a value between 40-1000 milliseconds for Beacon Interval
here. Beacon Interval value determines the time interval of the beacons. The beacons
Configure the Router in Access Point Mode
Advanced.
Middle
or
Low
which you would like to specify for the
78