Quick Setup - TP-Link AC750 User Manual

Chapter 4
• Operation Mode
• Wireless Radio
enabled or disabled.
• Name(SSID)
• Mode - The current wireless mode which the router works on.
• Channel - The current wireless channel in use.
• Channel Width
• MAC Address
• WAN - This field displays the current settings of the WAN, and you can configure them
on the Network > WAN
• MAC Address
• IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
• DNS Server
• Ethernet - Displays the current status of the Ethernet ports.
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
4. 2.

Quick Setup

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Quick Setup.
3. Click Next to start. Then follow the step-by-step instructions to connect your router
to the internet.
- The current wireless working mode in use.
- Indicates whether the wireless radio feature of the router is
- The SSID of the Router.
- The current wireless channel width in use.
- The physical address of the router.
page.
- The physical address of the WAN port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
Configure the Router
Renew or Release here to
14