TP-Link AC750 User Manual page 66

Chapter 4
• Diagnostic Tool - Select one diagnostic tool.
• Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
• Tracerouter
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is
successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case,
ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries.
• IP Address/Domain Name
Domain name (such as www.tp-link.com).
• Pings Count - The number of Ping packets for a Ping connection.
• Ping Packet Size - The size of Ping packet.
• Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no
reply in the specified time, the connection is overtime.
• Traceroute Max TTL
3. Click Start to check the connectivity of the internet.
4. The Diagnostic Results
the following figure, the connectivity of the internet is fine.
- This diagnostic tool tests the performance of a connection.
- Enter the destination IP address (such as 192.168.0.1) or
- The max number of hops for a Traceroute connection.
page displays the diagnosis result. If the result is similar to
Configure the Router
61