TP-Link AC750 User Manual page 95

Chapter 5
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router's web mangement page or Quick Setup
will be prompted for the router's username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
• To manage your router via the internet:
1. Specify the management web port number and click Save.
• Port - The default management web port number is 80 for HTTP, 443 for HTTPS.
For greater security, you can change the management web port to a number
between 1024 and 65535 but do not use the number of any common service
port. Tick Enable
• Available Host (IP/MAC)
your router from the internet.
• Certificate - A file that provides you with authentication information. Download
and install the certificate for Local Management via HTTPS if you need it. Once
the certificate is installed, warnings will not pop up when you access the router
via HTTPS.
2. Enter your router's WAN IP address into your browser's address bar, followed by a
colon and the custom port number you set in the Web Management Port box. For
example, if your Router's WAN address is 202.96.12.8 and you use port number 8080,
enter http://202.96.12.8:8080 in your browser.
to enable management via HTTPS.
- This is the current address you will use when accessing
Configure the Router in Access Point Mode
90