Download  Print this page

TP-Link AC750 User Manual

Ac750 wifi range extender
Hide thumbs

Advertisement

RE200
AC750 WiFi Range Extender
REV1.0.0
1910011070

Advertisement

loading

  Also See for TP-Link AC750

  Summary of Contents for TP-Link AC750

  • Page 1 RE200 AC750 WiFi Range Extender REV1.0.0 1910011070...
  • Page 2 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 4: Industry Canada Statement

    CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction...
  • Page 5 This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Korea Warning Statements 당해...
  • Page 6: Safety Information

    Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make repairs yourself.
  • Page 7: Declaration Of Conformity

    TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC750 WiFi Range Extender Model No.: RE200 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...
  • Page 8: Table Of Contents

    CONTENTS Package Contents ....................1 Chapter 1 Introduction................... 2 Product Overview....................2 Main Features ....................2 Appearance....................... 2 Chapter 2 Hardware Installation ................4 Before You Begin....................4 Basic Requirements ..................4 Connecting the Device..................5 Chapter 3 Quick Installation Guide............... 6 Chapter 4 Configure the Device................
  • Page 9: Package Contents

    Conventions The Range Extender, the Device or RE200 mentioned in this User guide stands for RE200 AC750 WiFi Range Extender without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.
  • Page 10: Chapter 1 Introduction

    Even though you may not be familiar with the Range Extender, you can easily configure it with the help of this Guide. Before installing the Range Extender, please look through this Guide to get the full information of the RE200 AC750 WiFi Range Extender. Main Features Complies with IEEE 802.11ac...
  • Page 11: Led Explanation

    RE200 AC750 WiFi Range Extender User Guide LED Explanation: Name Status Indication Solid Green The Range Extender is connected to the 5G/2.4G wireless network of your main Router/AP, and the signal strength is strong. 5G/2.4G The Range Extender is connected to the 5G/2.4G wireless network Solid Red of your main Router/AP, but the signal strength is weak.
  • Page 12: Chapter 2 Hardware Installation

    Note: TP-LINK recommends that you connect to the Range Extender when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones”. As in compliance with the wireless transmission protocol, all the Range Extender devices are set to work in half-duplex instead of full-duplex mode.
  • Page 13: Connecting The Device

    RE200 AC750 WiFi Range Extender User Guide Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above. Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉). Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
  • Page 14: Chapter 3 Quick Installation Guide

    RE200 AC750 WiFi Range Extender easily with a Web-based utility. With a Web-based utility, it is easy to configure and manage the RE200 AC750 WiFi Range Extender. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
  • Page 15 RE200 AC750 WiFi Range Extender User Guide After successful login, there will pop up the Quick Setup Start page. Click Next to get the quick setup started. Figure 3-3 Quick Setup Start Note: If you want to go through the Quick Setup right away, you can click Exit and enter the main menu of the device.
  • Page 16 RE200 AC750 WiFi Range Extender User Guide A list of available 2.4GHz wireless network will appear. Check the box before the SSID of your desired network, and then click Next. Figure 3-6 Quick Setup – Available Wireless Networks Note: If you could not find your wireless network name (SSID) in the list, you can click Rescan to redetect it or tick the checkbox before "Set SSID and MAC Manually"...
  • Page 17 RE200 AC750 WiFi Range Extender User Guide A list of available 5GHz wireless network will appear. Check the box before the SSID of your desired network, and then click Next. Figure 3-8 Quick Setup – Available Wireless Networks Note: If you could not find your wireless network name (SSID) in the list, you can click Rescan to redetect it or tick the checkbox before "Set SSID and MAC Manually"...
  • Page 18 RE200 AC750 WiFi Range Extender User Guide Double-check your wireless setting and network setting, when Figure 3-10 appears. If verified, click Finish to complete the Quick Setup. If there is anything wrong, click Back to return to the previous pages and reconfigure it.
  • Page 19 RE200 AC750 WiFi Range Extender User Guide Figure 3-12 Quick Setup – Completed...
  • Page 20: Chapter 4 Configure The Device

    AC750 WiFi Range Extender User Guide Chapter 4 Configure the Device This Chapter describes how to configure your Range Extender via the web-based management page. The RE200 AC750 WiFi Range Extender is easy to configure and manage with the ® Web-based (Internet Explorer, Netscape...
  • Page 21: Status

    RE200 AC750 WiFi Range Extender User Guide Figure 4-1 Status Firmware Version - This field displays the current firmware version of the Range Extender. Hardware Version - This field displays the current hardware version of the Range Extender. Connection Status to Existing Network (2.4GHz or 5GHz) - This part shows you the current information of the root wireless network which the device is connecting to.
  • Page 22: Quick Setup

    RE200 AC750 WiFi Range Extender User Guide Connection Status - It shows whether your device has been connected to a wireless network currently. "Connected" means the range extender have connected to a wireless network, while if it shows "disconnected", you can click "connect" to connect.
  • Page 23: Lan

    RE200 AC750 WiFi Range Extender User Guide 4.3.1 LAN Selecting Network > LAN will enable you to configure the IP parameters of Network on this page. Figure 4-3 LAN – Dynamic IP Figure 4-4 LAN – Static IP MAC Address - The physical address of the LAN port, as seen from the LAN. The value cannot be changed.
  • Page 24: Dhcp Settings

    RE200 AC750 WiFi Range Extender User Guide If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values, otherwise may result in lower wireless network performance or even can't work.
  • Page 25 RE200 AC750 WiFi Range Extender User Guide Figure 4-7 DHCP Settings – Off DHCP Server - Selecting the radio button before Auto/On/Off will disable/enable the DHCP server on your Range Extender. The default setting is Auto. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer.
  • Page 26: Dhcp Client List

    RE200 AC750 WiFi Range Extender User Guide 4.3.3 DHCP Client List Selecting Network > DHCP Client List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-8).
  • Page 27: Connect To Existing Network

    RE200 AC750 WiFi Range Extender User Guide 4.4.1 Connect To Existing Network Selecting Wireless > Connect To Existing Network will guide you to set the basic parameters to get a connection to the internet (show in Figure 4-10). Figure 4-10 Connect to Existing Network...
  • Page 28: Advanced Settings

    RE200 AC750 WiFi Range Extender User Guide 4.4.3 Advanced Settings Selecting Wireless > Advanced Settings will allow you to do some advanced settings for the device in the following screen shown in Figure 4-12. Figure 4-12 Extender Settings Beacon Interval - Specifies a value between 40-1000 milliseconds. The beacons are the packets sent by the device to synchronize a wireless network.
  • Page 29: High Speed

    RE200 AC750 WiFi Range Extender User Guide 4.4.4 High Speed Selecting Wireless > High Speed allows you to configure the wireless mode for your device (show in Figure 4-13). Figure 4-13 High Speed MAC Address - Shows the connected wireless station's MAC address.
  • Page 30: Led On/Off

    RE200 AC750 WiFi Range Extender User Guide Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected. Received Packets - packets received by the station.
  • Page 31: Firmware Upgrade

    RE200 AC750 WiFi Range Extender User Guide Figure 4-16 The System Tools menu 4.6.1 Firmware Upgrade Selecting System Tools > Firmware Upgrade allows you to upgrade the latest version of firmware for the device on the screen shown in Figure 4-17.
  • Page 32: Factory Defaults

    RE200 AC750 WiFi Range Extender User Guide 4.6.2 Factory Defaults Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-18. Figure 4-18 Restore Factory Defaults Click Restore to reset all configuration settings to their default values.
  • Page 33: Reboot

    RE200 AC750 WiFi Range Extender User Guide 4.6.4 Reboot Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure 4-20. Figure 4-20 Reboot the device Click the Reboot button to reboot the device.
  • Page 34: System Log

    RE200 AC750 WiFi Range Extender User Guide Note: The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it. Click Save when finished. Click Clear All to clear all.
  • Page 35: Appendix A: Factory Defaults

    RE200 AC750 WiFi Range Extender User Guide Appendix A: Factory Defaults Item Default Value Common Default Settings Username admin Password admin IP Address 192.168.0.254 Subnet Mask 255.255.255.0 Domain http://tplinkextender.net Wireless SSID TP-LINK_Extender_2.4GHz, TP-LINK_Extender_5GHz Wireless Security Disabled Wireless MAC Address Filtering...
  • Page 36: Appendix B: Troubleshooting

    RE200 AC750 WiFi Range Extender User Guide Appendix B: Troubleshooting T1. How do I restore my Range Extender’s configuration to its factory default settings? There are TWO methods available to restore the factory defaults. Method 1: With the Range Extender RE200 powered on, use a pin to press the RESET button on the rear panel for 1 second before releasing it.
  • Page 37 TP-LINK recommends that you connect to the Range Extender when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones”.
  • Page 38: Appendix C: Specifications

    RE200 AC750 WiFi Range Extender User Guide Appendix C: Specifications General IEEE 802.3, 802.3u, 802.11ac, 802.11n, 802.11b and 802.11g, Standards and Protocols TCP/IP, DHCP Safety & Emission Ports One 10/100M Auto-Negotiation LAN RJ45 port Wireless Frequency Band 2.4~2.4835GHz 11ac: up to 433Mbps(Automatic)...
  • Page 39: Appendix D: Glossary

    RE200 AC750 WiFi Range Extender User Guide Appendix D: Glossary 802.11ac - IEEE 802.11ac is a wireless computer networking standard of 802.11.This specification will enable multi-station WLAN throughput of at least 1 gigabit per second .This is accomplished by extending the air interface concepts embraced by 802.11n: wider RF bandwidth, more MIMO spatial streams, multi-user MIMO, and high-density modulation (up to 256 QAM).
  • Page 40 RE200 AC750 WiFi Range Extender User Guide Wi-Fi –A trademark of the Wi-Fi Alliance and the brand name for products using the IEEE 802.11 family of standards. WLAN (Wireless Local Area Network) - A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area.

This manual is also suitable for:

Re200Re200 ac750