System Routing Table; Bandwidth Control - TP-Link Archer C8 User Manual

Click the button to disable all the entries.
Disable All
Click the button to delete all the entries.
Delete All
Click the button to view the information in the previous screen, click the
Previous
view the information in the next screen.
5.14.2

System Routing Table

Choose menu "
Advanced
view the System Routing Table in the next screen (shown in Figure 5-82). System routing table
views all of the valid route entries in use. The Destination IP address, Subnet M ask, Gateway, and
Interface will be displayed for each entry.
Destination Network

which the static route is assigned.
- The Subnet Mask determines which portion of an IP address is the network
Subnet Mask

portion, and which portion is the host portion.
- This is the IP address of the gateway device that allows for contact between the
Gateway

router and the network or host.
- This interface tells you either the Destination IP Address is on the
Interface

(internal wired and wireless networks), or on the

5.15 Bandwidth Control

Figure 5-83 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 5-83:
and
Settings Rules List
function. The detailed explanations for each submenu are provided below.
Archer C8
Advanced Routing
Figure 5-82 System Routing Table
- The Destination Network is the address of the network or host to
. Click any of them, and you will be able to configure the corresponding
AC1750 Wireless Dual Band Gigabit Router
System Routing Table
(Internet).
WAN
button to
Next
", and then you can
LAN & WLAN
Control