Diagnostic And Maintenance Functions; Drive Status Web Page - Topic Details - IBM TS2280 Setup, Operator, And Service Manual

Text Only version (for cut and paste)
system time: 2015/08/18 09:06:39
drive time : 259 seconds
Figure 9. Drive Status web page - topic details
The web page format is changed to text mode by selecting the "Text Only version" box near the top of
the web page. In text mode, the tape drive status information can be copied and pasted easily if it must
be sent to support personnel.

Diagnostic and maintenance functions

The drive can:
v Run diagnostics
v Test write and read functions
v Test a suspect tape cartridge
v Update firmware
v Perform other diagnostic and maintenance functions
The drive must be in maintenance mode to perform these functions.
Attention: Maintenance functions cannot be performed concurrently with read or write operations.
While in maintenance mode, the tape drive does not accept host interface commands from the server. The
tape drive does accept LDI or RS-422 commands.
Table 6 on page 22 describes each diagnostic and maintenance function that the drive can perform, gives
the function code which appears on the Single-character Display (SCD), and directs you to the
ULT3580-HH8 Drive YX1013000128
YX1013000128
ULT3580-HH7
LTO7 F8E0
idle
21
Operations