Silvercrest SMRA 5.0 A1 Operating Instructions And Safety Instructions page 12

SilverCrest SMRA 5.0 A1
DANGER! Radio interface
Turn the device off when on board an aircraft, in a hospital, in an operating theatre or in the vicinity of electronic
medical equipment. The RF signals may interfere with the functionality of sensitive devices. Keep the device at least 20
cm (8 inches) away from pacemakers, as the RF signals could interfere with the functionality of the pacemaker. The RF
signals transmitted can interfere with hearing aids. If the wireless mode is switched on, do not place the device near
flammable gases or in a potentially explosive area (e.g. a paint shop), as the RF signals transmitted could cause
explosions or fire. The range of the radio frequency signals depends on environmental conditions. If data is
transmitted via a wireless connection, it can also be received by unauthorised parties. Targa GmbH is not liable for
any interference caused to RF or TV signals through unauthorised modification to this device. Furthermore, Targa
accepts no liability for replacing any cables or devices that have not been specifically approved by Targa GmbH.
The user is solely responsible and liable for remedying any interference caused by such unauthorised modification of
this device and for replacing appliances.
Servicing / Repair
Repairs are required if this device is damaged in any way, for example, if the power adapter or device housing is
damaged, if liquids or objects have entered the device or if the product has been exposed to rain or moisture. Repairs
are also necessary if the product is not working properly or has been dropped. If you notice any smoke, unusual
noise or strange smells, switch off the device immediately and pull the power adapter out of the power socket. If this
occurs, do not continue to use the device and have it checked out by an expert. All repairs must be carried out by
qualified service personnel.
Operating environment
The device is not designed for use in environments with high humidity (e.g. bathrooms) or excessive levels of dust.
Operating temperature and operating humidity: 0 to 35 °C, max. 85% relative humidity.
Please note that caring products for furniture surfaces may contain substances that can damage the rubber feet of the
adapter, so be careful if you have been using this type of products.
10 - English