Getting Started; Connecting The Adapter To The Hi-Fi Equipment; Switching The Adapter On; Establishing The Wi-Fi Connection - Silvercrest SMRA 5.0 A1 Operating Instructions And Safety Instructions

SilverCrest SMRA 5.0 A1
Important! Please note the following:
Do not interrupt the power supply to the device while the update is running. Please wait for the update to complete.
The entire process is automatic, you don't need to do anything.
If you have any questions regarding the update process, please contact our hotline, who will be happy to help you.

Getting started

Connecting the adapter to the Hi-Fi equipment

Connect one end of the supplied RCA cable (C) to the AUDIO OUT L (6) and AUDIO OUT R (7) sockets of the
adapter and the other end to the RCA audio input of your Hi-Fi equipment. Alternatively you can use an optical
S/PDIF cable (not supplied) to connect the S/PDIF (8) socket of the adapter to the optical S/PDIF input (if any) of
your Hi-Fi equipment. To finish, select the corresponding input on your Hi-fi system. See also the User Manual for your
Hi-fi system.

Switching the adapter on

Connect the adapter to the supplied power adapter (B) and then connect the power adapter (B) to an easily
accessible power socket. Toggle the power switch (12) located on the back panel of the unit to "ON". The green and
blue LEDs go on simultaneously. After initialising, the blue LED flashes slowly. The adapter is now in AP mode.

Establishing the Wi-Fi connection

There are 2 ways to connect the adapter (A) to the existing network of your router via Wi-Fi: either by pressing the
WPS button (5) or by downloading the "SilverCrest Smart-Audio" control app for free from the Apple
®
from the Google Play Store. In both cases, when establishing the connection for the first time, make sure to place the
adapter (A) as close as possible to the router to achieve an optimum Wi-Fi signal transmission. Then install the
adapter (A) within the Wi-Fi signal range.
Please note that a maximum of 16 multiroom devices can be connected to a network. Furthermore the multiroom
devices and your smartphone/tablet must be connected to the same network.

Establishing the Wi-Fi connection via WPS

If your router features a WPS button, the easiest way to connect the adapter (A) to the network is using this button.

Place the power switch (12) in "ON" position to go to connection mode. After a brief initialisation period
(green and blue LEDs on simultaneously, then one LED briefly lights up green) only the blue LED flashes slowly.
14 - English
®
App Store or