Hill Descent Control (Hdc) System - If Equipped - Alfa Romeo STELVIO 2020 Owner's Manual

Hide thumbs Also See for STELVIO 2020:
Table of Contents

Advertisement

WARNING!
Electronic Stability Control (ESC) cannot
prevent the natural laws of physics from
acting on the vehicle, nor can it increase
the traction afforded by prevailing road
conditions. ESC cannot prevent accidents,
including those resulting from excessive
speed in turns, driving on very slippery
surfaces, or hydroplaning. ESC also
cannot prevent accidents resulting from
loss of vehicle control due to inappro-
priate driver input for the conditions. Only
a safe, attentive, and skillful driver can
prevent accidents. The capabilities of an
ESC equipped vehicle must never be
exploited in a reckless or dangerous
manner which could jeopardize the user's
safety or the safety of others.
Vehicle modifications, or failure to prop-
erly maintain your vehicle, may change
the handling characteristics of your
vehicle, and may negatively affect the
performance of the ESC system. Changes
to the steering system, suspension,
braking system, tire type and size or wheel
size may adversely affect ESC perfor-
mance. Improperly inflated and unevenly
worn tires may also degrade ESC perfor-
mance. Any vehicle modification or poor
vehicle maintenance that reduces the
effectiveness of the ESC system can
increase the risk of loss of vehicle control,
vehicle rollover, personal injury and death.
Hill Descent Control (HDC) System — If
Equipped
The Hill Descent Control (HDC) function is an
integral part of the Electronic Stability Control
(ESC) system, keeping the vehicle at a
constant speed while descending a hill by
actively controlling the brakes.
HDC aims to create vehicle stability and safer
driving in various situations, including poor
grip conditions and steep descents.
The system has three different modes:
Off: the system is deactivated
Enabled: the system is enabled and ready to
intervene when the activation conditions
are met
Active: the system actively controls the
vehicle speed
Enabling The System
To enable the system, push the HDC switch
located on the steering wheel.
HDC Switch
The system is enabled if the car speed is below
20 mph (30 km/h). The system stays enabled
until the car speed reaches 37 mph
(60 km/h), the system is disabled at speeds
above 37 mph (60 km/h).
Activation of the HDC system is indicated by
the white
icon appearing in the instrument
cluster display.
HDC Symbol
105

Advertisement

Table of Contents
loading

Table of Contents