Description; Operating Mode - Alfa Romeo STELVIO 2020 Owner's Manual

Hide thumbs Also See for STELVIO 2020:
Table of Contents

Advertisement

CAUTION!
The system uses R1234yf refrigerant, which
does not pollute the environment in the
event of accidental leakage. Under no
circumstances, use R134a and R12 fluids,
which are incompatible with the
components of this system.

Description

The Automatic Dual Zone Climate Control
System adjusts the temperature and air distri-
bution independently between the driver and
passenger.
The system maintains the set temperature
inside the passenger compartment and
compensates for outside temperature change.
NOTE:
The reference temperature is 72°F (22°C) for
optimal comfort management.
The automatic setting will adjust the following
to maintain comfort within the passenger
compartment:
Air temperature from the driver/front
passenger side vents
Air
distribution
from the
passenger side vents
50
Fan speed (continuous variation of the air
flow)
Compressor variations (for cooling/dehu-
midifying the air)
Air recirculation
The Climate Control System can also be oper-
ated manually by using the buttons and knobs
on the faceplate.
Manual selections will override the automatic
settings, which are stored until the AUTO
button is pushed. If the system intervenes for
safety reasons, the automatic setting will take
control of the system.
The below operations will not deactivate the
automatic (AUTO) function:
Air Recirculation activation/deactivation
A/C activation/deactivation
SYNC function activation
Rear Window Defrost activation/deactiva-
tion
When in AUTO mode, the vehicle's internal
temperature is controlled according to the set
temperature.
The following can be manually set or adjusted:
driver/front
Driver/passenger air temperature
Blower speed (continuous variation)
Air distribution (seven positions for driver
and passenger)
A/C activation
Front Defroster
Air recirculation
Rear Defroster
System deactivation

Operating Mode

The Climate Control system can be activated
in different ways. It is recommended to use the
automatic function. Push the AUTO button and
set the desired temperatures.
The automatic system adjusts the tempera-
ture, quantity, and distribution of air intro-
duced into the passenger compartment. It
also controls air recirculation and the activa-
tion of the air conditioner.
At any time during automatic operation, you
can change the temperature, activate or deac-
tivate the Rear Defroster, activate SYNC, acti-
vate or deactivate the air conditioner, and
activate or deactivate air recirculation. The
system will automatically adjust to the new
settings.

Advertisement

Table of Contents
loading

Table of Contents