Table of Contents
Advertisement
Door Locking
To lock the doors, proceed as follows:
1. Make sure that you have the key fob and
are close to the driver's or passenger's
side door handle.
2. Push the Passive Entry door handle button
or the Passive Entry liftgate button, which
is located as part of the external liftgate
release button switch. This will lock all
doors and the liftgate. Door locking will
activate the alarm as well.
Passive Entry Door Handle Button
External Liftgate Release Button
(Vehicles With Passive Entry)
NOTE:
After pushing the Passive Entry door handle
button, you must wait two seconds before the
doors can be unlocked again using the passive
entry door handle button. This feature makes
it possible to check whether the vehicle has
been locked correctly by pulling the door
handle within two seconds. The doors will not
be unlocked again.
The vehicle doors and liftgate can be locked by
pushing the lock button on the key fob or on
the interior door lock.
Driver Side Door Emergency Opening
If the key fob does not work, e.g. because its
battery is discharged or the vehicle battery is
discharged, the emergency key can be used to
unlock the driver side door.
To remove the emergency key from the key
fob, proceed as follows:
1. Push the sides of the key fob inward and
extract the cover pulling downwards.
2. Remove the emergency key from the key
fob housing.
3. Insert the emergency key in the driver side
door lock cylinder and turn it to the left
(counter clockwise) to unlock the door.
Emergency Key Release Buttons
23
Advertisement
Table of Contents
