Table of Contents
Advertisement
System Activation/Deactivation
The system is activated/deactivated by
pushing the button located on the end of the
multifunction lever, or through the "Driver
Assistance" widget though the radio system
within the "Comfort" menu.
Lane Departure Warning System Activation/
Deactivation Button
NOTE:
When the engine is started, the system main-
tains the operating mode that was selected
when it was turned off.
202
Activation Conditions
Once turned on, the system becomes active
only if the following conditions are met:
The vehicle speed is equal to or above
37 mph (60 km/h); the system is deacti-
vated at speeds equal to or greater than
110 mph (180 km/h).
The lane limit lines are visible at least on
one side.
There are suitable visibility conditions.
The road is straight or with wide radius
bends.
A suitable distance is kept from the vehicle
in front.
The turn signal is not active.
Symbols And Messages On The Display
The Lane Departure Warning system advises
the driver when the vehicle leaves the driving
lane by showing symbols and messages on the
instrument cluster display.
When the system is active and the lane limits
have not been detected, the display shows two
grey lane lines.
Lane Limits Not Detected
Exiting A Lane With Detection Of A Single Limit
When the system is active and only, for
example, the left lane limit has been detected,
the detected lane illuminates in white on the
display. The system is then ready to provide
visual warnings on the display in the event of
unintentional exiting of the lane (turn signal
not activated) to the left.
Left Lane Limit Detected
Advertisement
Table of Contents
