Speed Limiter; Description; Activation; Speed Limit Programming - Alfa Romeo STELVIO 2020 Owner's Manual

Hide thumbs Also See for STELVIO 2020:
Table of Contents

Advertisement

SPEED LIMITER

Description

This feature allows the driver to program the
maximum speed of the vehicle.
NOTE:
The maximum set speed can be exceeded by
continuing to press the accelerator pedal.
The maximum speed can be set with the
vehicle stationary or in motion. The minimum
speed that can be set is 18 mph (30 km/h).
When this feature is active, the vehicle speed
depends on the pressing of the accelerator
pedal until the programmed speed limit is
reached. Refer to "Speed Limit Programming"
in this section for further information.

Activation

The feature can be activated/deactivated
through the radio system.
Activating The Device
To access this feature, select the "Driver Assis-
tance" widget in the radio system, then select
the following items in sequence:
1. "Comfort"
2. "Speed Limiter"
3. "ON"
The activation of this feature is signaled by the
illumination of the green Speed Limiter icon,
along with the last speed set, in the instru-
ment cluster display. The Speed Limiter
feature can remain active concurrently with
the Speed Control system. If a speed limit
below the one indicated in the Speed Control
is selected, the Speed Control speed will be
lowered to that of the Speed Limiter. This func-
tion remains available in RACE mode.
Speed Limiter Display

Speed Limit Programming

The speed limit can be programmed through
the radio system.
To access the function on the main menu,
select the following items in order:
1. "Settings"
2. "Safety"
3. "Speed Limiter Set Speed"
By turning the Rotary Pad, the speed increases
by 5 mph (5 km/h), from a minimum of
18 mph (30 km/h) to a maximum of 112 mph
(180 km/h).

Exceeding The Programmed Speed

By fully pressing the accelerator pedal, the
programmed speed can be exceeded even
with the device active (e.g. in the event of over-
taking).
The device is disabled until the speed drops
below the set limit, after which it reactivates
automatically.

Programmed Speed Icon Flashing

The programmed speed will flash in the
following scenarios:
When the accelerator pedal has been fully
pressed and the vehicle has exceeded the
programmed speed.
Activating the system after setting a limit
below the effective speed of the vehicle.
In the event of overtake acceleration.

Deactivation

The feature can be activated/deactivated
through the radio system.
173

Advertisement

Table of Contents
loading

Table of Contents