Table of Contents
Advertisement
Park Sensors
This function can be used to select the type of
warning provided by the Park Sensors system.
The options available are:
"Mode": the possible options are: "Sound",
the system notifies the driver of the pres-
ence of an obstacle by means of acoustic
signals only, by means of the speakers in
the car or "Sound and Display", the system
notifies the driver of the presence of an
obstacle by means of acoustic signals (by
means of the speakers in the car) and visual
signals, on the system display.
"Audio": allows you to select the volume of
the acoustic signals provided by the Park-
Sense system, the possible options are
"High", "Medium", or "Low".
88
Rear View Camera — If Equipped
This function can be used to carry out the
following adjustments related to the rear view
camera:
"Active": Lets you activate viewing the video
camera on the display.
"Switch-Off Delay": Allows you to delay
switching off the camera by a few seconds
when reverse gear is disengaged.
"Camera Guidelines": Allows you to activate
the display of the dynamic guidelines that
indicate the route of the car.
AHB (Automatic High Beam) System — If
Equipped
This function can be used to activate/ deacti-
vate the automatic high beam headlights.
SLIDER
For some systems, the setting is adjusted
using a Slider which appears on the display.
It is possible to interact on this Slider by using
the touchscreen function or by acting on the
Rotary Pad.
Using the touchscreen function, proceed as
follows:
Slide your finger on the Slider to the left to
DECREASE the value or to the right to
INCREASE the value.
Press the "OK" graphic button to confirm:
the new value selected will be saved.
Using the controls located on the center stack,
proceed as follows:
Move the Rotary Pad to the left to
DECREASE the value or move the Rotary
Pad to the right to INCREASE the value.
Press the Rotary Pad: the new selected
value will be stored.
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
