Table of Contents
Advertisement
P
S
ARK
ENSE
This function can be used to select the type of
warning provided by the Park Sensors system.
The options available are:
"Mode": The possible options are: "Sound",
the system notifies the driver of the presence
of an obstacle by means of auditory signals
only, by means of the speakers in the car, and
"Sound and Display". The system notifies the
driver of the presence of an obstacle by means
of acoustic signals (by means of the speakers
in the car) and visual signals, on the system
display.
"Front Sensors Active in Drive": Allows you to
select if the front sensors are active in Drive.
The options are "On" and "Off".
"Audio": Allows you to select the volume of the
acoustic signals provided by the ParkSense
system, the possible options are "High",
"Medium", and "Low".
88
R
C
— I
E
EARVIEW
AMERA
F
This function can be used to carry out the
following adjustments related to the rearview
camera:
"Active": Lets you activate viewing the video
camera on the display.
"Camera Delay": Allows you to delay switching
off the camera by a few seconds when reverse
gear is disengaged.
"Camera Guidelines": Allows you to activate
the display of the dynamic guidelines that
indicate the route of the car.
AHB (A
H
B
UTOMATIC
IGH
EAM
S
— I
E
YSTEM
F
QUIPPED
This function can be used to activate/deactivate
the automatic high beam headlights.
SLIDER
For some systems, the setting is adjusted using a
Slider which appears on the display.
It is possible to interact on this Slider by using
the touchscreen function or by acting on the
Rotary Pad.
QUIPPED
Using the touchscreen function, proceed as
follows:
Slide your finger on the Slider to the left to
DECREASE the value or to the right to
)
INCREASE the value.
Press the "OK" graphic button to confirm the
new value selected will be saved.
Using the controls located on the center stack,
proceed as follows:
Move the Rotary Pad to the left to DECREASE
the value or move the Rotary Pad to the right to
INCREASE the value.
Push the Rotary Pad. The new selected value
will be stored.
Advertisement
Table of Contents
