Page 1
SD3/XD3 24 Vdc controls. It is used by the operator to perform manual purge functions during system operation. Standard Control Box Two-Hand Down Control Box 10018460/10018461 Figure 1 Controls Locator Ram Down Ram Up Neutral Purge Two-Hand Down Control Figure 2 Controls Icons E 2019 Nordson Corporation Part 1615505-01...
Page 2
Air pressure remains in the ram cylinders. Small air leaks in the circuit can cause the ram to drift upward or downward. When performing maintenance, make sure that the ram and follower plate is on the bulk unloader base or secured using support blocks. Part 1615505-01 E 2019 Nordson Corporation...
Page 3
3. Install the new control box (4) onto the mounting brackets (5) using the socket screws (2) and lock washers (3). Tighten the screws securely. 4. Connect the cables (1) to the control box (4). 10018460/10018461 Figure 3 Replacing a Control Box E 2019 Nordson Corporation Part 1615505-01...
Rhino SD3/XD3 Control Box Parts To order parts, call the Nordson Industrial Coating Customer Support Center at (800) 433−9319 or contact your local Nordson representative. Standard Control Box 10018460 Figure 4 Standard Control Box Part 1615505-01 E 2019 Nordson Corporation...
Page 5
ENCLOSURE, Rhino, standard, SD3, — — 1617963 gray WASHER, flat, M, regular, M6, steel, −−−−−− −−−−−− −−−−−− zinc, per ISO 7089 SCREW, button, socket, cap, M6 x 16, −−−−−− −−−−−− −−−−−− zinc, class 12.9 per ISO 7380 E 2019 Nordson Corporation Part 1615505-01...
Page 6
Rhino SD3/XD3 Control Box Two-Hand Down Control Box 10018461 Figure 5 Two-Hand Down Control Box Part 1615505-01 E 2019 Nordson Corporation...
Page 7
ENCLOSURE, Rhino, two-hand, SD3, — — 1617966 gray WASHER, flat, M, regular, M6, steel, −−−−−− −−−−−− −−−−−− zinc, per ISO 7089 SCREW, button, socket, cap, M6 x 16, −−−−−− −−−−−− −−−−−− zinc, class 12.9 per ISO 7380 E 2019 Nordson Corporation Part 1615505-01...
Page 8
Rhino SD3/XD3 Control Box. Number Description 10018521 Rhino SD3/XD3 Control Box Original copyright date 07/2019. Nordson, the Nordson logo, and Rhino are registered trademarks of Nordson Corporation. All other trademarks are the property of their respective owners. Part 1615505-01 E 2019 Nordson Corporation...