Configuring Time Settings - Huawei IPC6131-WD-A User Manual

Hide thumbs Also See for IPC6131-WD-A:
Table of Contents

Advertisement

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
– HTTP: Allows the same quality as of TCP without setting specific ports for streaming
– MULTICAST: It's recommended to select MCAST type when using the Multicast
– Live View Performance: Set the live view performance to Shortest Delay, Real Time,
l Rules: It refers to the rules on your local browser, select enable or disable to display or not
display the colored marks when the motion detection, face detection, or intrusion detection
is triggered. E.g.: enabled as the rules are, and the face detection is enabled as well, when a
face is detected, it will be marked with a green rectangle on the live view.
l Image Format: Choose the image format for picture capture.
Record File Settings
Set the saving path of the recorded video files. Valid for the record files you recorded with the
web browser.
l Record File Size: Select the packed size of the manually recorded and downloaded video
files to 256M, 512M or 1G. After the selection, the maximum record file size is the value
you selected.
l Save record files to: Set the saving path for the manually recorded video files.
l Save downloaded files to: Set the saving path for the downloaded video files in playback
mode.
Picture and Clip Settings
Set the saving paths of the captured pictures and clipped video files. Valid for the pictures you
captured with the web browser.
l Save snapshots in live view to: Set the saving path of the manually captured pictures in live
view mode.
l Save snapshots when playback to: Set the saving path of the captured pictures in playback
mode.
l Save clips to: Set the saving path of the clipped video files in playback mode.
NOTE
Step 3 Click
----End

8.2 Configuring Time Settings

You can follow the instructions in this section to configure the time synchronization and DST
settings.
Step 1 Enter the Time Settings interface: Configuration > Basic Configuration >System > Time
Settings. Or Configuration > Advanced Configuration >System > Time Settings.
Issue 02 (2014-12-25)
under some network environments.
function. For detailed information about Multicast, refer to
Settings.
Balanced or Fluency.
You can click
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
to change the saving path of the clips and pictures.
8 Network Camera Configuration
8.3.1 Configuring TCP/IP
72

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents