Configuring Snapshot Settings - Huawei IPC6131-WD-A User Manual

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3.
4.
Step 6 Click Save to save the settings.
----End

9.3 Configuring Snapshot Settings

You can configure the scheduled snapshot and event-triggered snapshot. The captured picture
can be stored in the SD card (if supported) or the netHDD (For detailed information about
Issue 02 (2014-12-25)
l Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motionandalarm are
triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection and Alarm Input Settings interfaces. Please refer to
Motion Detection and
l Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external alarm is
triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection and Alarm Input Settings interfaces. Please refer to
Motion Detection and
NOTE
Other recording refers to "line crossing detection", "intrusion", "Audio Exception" and "Events".
Figure 9-8 Edit Record Schedule
Check the checkbox of Select All and click Copy to copy settings of this day to the whole
week. You can also check any of the checkboxes before the date and click Copy.
Click OK to save the settings and exit the Edit Record Schedule interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8.6.4 Configuring Alarm
8.6.4 Configuring Alarm Output
9 Storage Settings
8.6.1 Configuring
Output.
8.6.1 Configuring
for detailed information.
113