Recording And Capturing Pictures Manually - Huawei IPC6131-WD-A User Manual

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
Icon
NOTE
To play the live video in a full screen, double-click in the live video. To exit the full screen,
double-click in the live video again.

7.2 Recording and Capturing pictures Manually

In the live view interface, click
record the live view.
When an image is captured, the following message box will pop up at the lower left corner.
Figure 7-3 Capture succeeded
Issue 02 (2014-12-25)
l Before enabling two-way audio function or recording with audio, please set Stream Type to Video &
Audio in 8.4.1 Configuring Video
l After you start recording or two-way audio manually, if you leave the live view page, the recording or
two-way audio will be stopped.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Manually capture an image and save it as a JPEG file. (You can
set the save path in Configuration > Local Configuration >
Save snapshots in live view to.)
Manually start or stop recording. (You can set the save path in
Configuration > Local Configuration > Save record files
to.)
Enable E-PTZ function
Icon that specifies the alarm input channel ID. The icon is
displayed on the live video image when alarm input exists.
Settings.
on the toolbar to capture the live pictures or click
7 Live View
to
67