Huawei IPC6131-WD-A User Manual page 45

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
NOTE
Figure 3-53 Remove the Removable Part
Step 6 View the image via the web browser.
Step 7 Slightly loosen the hex screw beside the WPS/RESET button to adjust the surveillance angle.
Step 8 Use the supplied adjusting tool to adjust the pan [±30°], tilt [0°~80°], and rotation direction [0°
~360°].
Figure 3-54 3-axis Adjustment
Step 9 Tighten the hex screw to fix the well-adjusted surveillance angle.
Step 10 Align the front cover to the dome drive and tighten the set screws on the front cover.
Issue 02 (2014-12-25)
Use a plier to remove the removable part and route the cables via side outlet (as shown in Figure below)
if no cable hole is drilled in Step1, and connect the corresponding cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Camera Installation
37