Line In-Pgm Out - Teac TASCAM 388 STUDIO 8 Operation & Maintenance Manual

1-4-7. LINE IN—•►PGM OUT
1.With a 1kHz, -lOdBV (0.3 V) signal con-
nected to the LINE IN jack, set the INPUT
switch to LINE.
2. Set the ¡nput PAN to position L/ODD (fully
CCW).
3. Depress the ASSIGN 1 and L switches to on.
4. Adjust the Input Fader for a -10 dBV (0.3 V)
reading at PGM OUT 1 and STEREO OUT
jacks.
5. Input Fader should then be in the shaded area
between 7 and 8.
6. Confirm that the VU meters indícate O VU.
7. The remaining channeis 2 to 8 should aiso
be checked in the same manner, with the
PAN knob turned fully CW for assignment to
EVEN PGM busses.
8. Set the PAN knob to the center position.
Output level at each ASSIGNed PGM busses
should be -12.5 dB ±1 dB.
L PGM-Pyl.
-lOíBV
L @
jraEOBU^JN J
-10^ R
EFFECT RTN
PGM BUSS IN
odsv
I OL I
-lOd^
wSíss
SENO HCV
EFFECT RTN
MBu
I PGM MASTERS
@ -lOíav
- ÁUX-OUT
MIC ¿N
éóisv
ASSIGN
INPUT
FADER
INPUT
TRlffl
LINEJNj
lOdSV
EFFECT OUT
I MASTER I
STEREO OUT
f rNPUT PCB) I CH eCH
TAPE OUT
0(jBv 5
ISTEREO MASTER
L 0AL/UNBAL_j
MONITOR/PHONES
PEAriND *6 <BV
MONjTOR OUT
-lOtfBv
PGM I
TRK I
TRK
PGM 2
[PHQNES
OOnM/Gfl
TRK
PGM 3
TRK 2
TRK 2
TRK
PGM 4
€>
TRK 3
STEREO L
TRK
PGM 5
TRK 3
I TRK 4 STEREO R
TRK
PGM 6
/EFFECT
TRK 4
TRK
PGM 7
TRK 5
dbxS-a
TRK 6
1 18
1 - 19