Teac TASCAM 388 STUDIO 8 Operation & Maintenance Manual page 43

\
^^LTage CONVERSION
volt 'S adjusted to opereta on
pack^® ®P®cified ort the uriit, power cord tag, or
"'^'"9 cartón.
This voltage conversión is
r ;Poclels soid in the U.S.A., Cañada. UK.
•"Qlia or Europe.
cha export units, if ¡t '' "^'^^ctndio 8
t^Pae the voltage raqui rements of theStudio B
-^atch 7our area use the
? ALWAYS DISCONECT THE POWER
CORD BEFORE MAKING THESE
^Haimges.
lócate the voltage selector
¡llustration. j^w/pr turn
• ^aing a regular (slot ind'icates
selector so that the set m wQitage
numeráis corresponding the
tequirements of your area.
NOTE FOR U.K. CUSTOMERS
U.K. CUSTOMERS ONLY:
Due to the vareity of plugs being used in the
U.K., this unit is soId without an AC piug. Please
request your dealer to install the correct plug to
match the mains power outlet where your unit
will be used as per these instructions.
IMPORTANT
The wires in this mains lead are coloured in
accordance wlth the following code:
BLUE:
BROWN:
NEUTRAL
LIVE
As the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured marking identifying the termináis in
your plug, proceed as follows,
The wire which is coloured BLUE must be con-
nected to the terminal which is marked with thé
letter N or coloured BLACK. The wire which is
coloured BROVVN must be connected to the
terminal which is marked with the letter L or
coloured RED.
This product is manufacturad to comply
radio interferenceof EEC directiva "82/499/
©.
43 -