The "Speed of Light" Test mode has Three Test Configurations allowing you to
explore the functioning of the Sound, Light & Display, and the Game Switches and to
allow an operational test. (Refer to the Test Mode Diagram below).
The Test mode is also used for Clearing Game Errors. If there is an active error, its
code will be displayed. To try to clear the error code, press the red test button once.
The error can be bypass by quickly pressing the red test button twice.
Entering Test Mode will CLEAR any CREDITS remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to the game for
approximately four minutes, it will automatically RETURN to Attract Mode.
TEST MODE DIAGRAM
ATTRACT MODE
SOUND, LAMPS & DISPLAY TEST
The Display counts,
all Lamps are flashing
and Sound is played
SWITCH INPUT TEST
TICKET notch
is active
C
0
1
RUN TEST
r
r
r
R
Operator's Manual – Speed Of Light
LAI GAMES
©
TEST MODE
* NOTE! *
PRESS TEST
PRESS TEST
No INPUT is active
C
0
SERVICE switch
is active
To
C
0
2
PRESS TEST
PRESS
r
SERVICE
TICKET RUN TEST
Press Service button to activate
Ticket dispenser test function
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
Page 10
PLAY MODE
0
0
1
1
9
9
0
C
0
6
PRESS
1
Dispensing Ticket
SERVICE
0
1
9
C
4
0
0
0