Gorenje iQook Quick Reference Manual

SLOW COOKING
1
CONTROL
LIGHTS DURING
OPERATION
(for functions that
require the use of the
lid)
The water/oil is
not boiling/has not
heated up yet.
COUNTDOWN
(depending on model)
Touch the cooking
zone selector key.
The countdown
timer is connected to
the active cooking zone.
When the cooking time
expires, the cooking
zone will be switched
off.
MINUTE
Touch the timer
function key.
The minute minder
Display "CL" will
will remain active after
turn to "0".
the hob is switched off.
PROBLEM Possible causes
Boil Sense function is activated.
Boil Sense function is activated.
The lid was removed.
(flashing)
Battery low, or interrupted communication with the
cooking hob.
(flashing)
F1
Dirty or damaged bottom side of the IQ sensor.
Error in communication between the IQ sensor and the
F2
hob.
F3
IQ sensor battery low.
F4
Cooking zone is too hot.
5 sek.
Select the symbol. The
symbol will be lit up.
Symbol , after five seconds, it will
go out.
The water/oil is
boiling/has heated
up. Place the food
into the pot.
Use the slider to set
the cooking power
level.
Touch the slider
to set the value
between 1 and 9
minutes.
Confirm the setting
by touching the
timer key.
Method 1
2
When the water heats up,
the symbol will light up.
This function is suitable for
dishes that take longer to cook –
with slow heating by maintaining
the temperature.
Remove the lid The symbol will
(only with cooking flash and if you
remove the lid,
with a large amount
of water – method there will be a beep.
2). Put the food into Replace the lid!
Press anywhere on
the pot or pan and
press any field on the slider.
the slider.
Touch the timer Touch the slider
function key. to set the value
between 1 and 9
Display "CL" will
turn to "0" and the minutes.
symbol (clock) will Confirm the setting
by touching the
flash, indicating
timer key.
the active cooking
zone.
Confirm the setting The display will turn
by touching the to "X" (X ... selected
timer key. value). Now set the
value "1x to 9x". The
value will be stored
and the countdown
will start.
Solution
Remove the pan from the cooking zone. (out of liquid)
Pan bottom is wet. Wipe the pan and restart the cooking
process.
Place the lid back onto the pot or pan.
Press the key on the IQ sensor or restart the program.
Replace the battery.
Clean the bottom side of the IQ sensor.
If the bottom side is damaged, do not use the sensor.
Replace the battery on the IQ sensor.
Replace the battery.
Wait until the cooking zone cools down.
Method 2
3
Select the symbol which
will start to flash.
When milk heats up, the symbol
will light up.
SmartSense
- This control
system makes
sure the food in
the pot or pan
does not boil
over if there is
a shortage of
liquid.
The display will
turn to "X" (X ...
selected value).
Now set the
value "1x to 9x".
The value will be
stored and the
countdown will
start.
If no cooking zone
is selected, the
cooking hob will
be switched off
automatically after
a few seconds and
the minute minder
display will be
saved.