Parameters/address space
4.2 Description of parameters
4.2
Description of parameters
4.2.1
Configuration control
You can use this parameter to enable the configuration control function in the ET 200SP
distributed I/O system.
Note
Configuration control
The "Configuration control" function can only be used if you set the parameter "Startup if
preset configuration does not match actual configuration" to yes at the same time.
Note
Configuring the enable
If you configure the enable, the ET 200SP distributed I/O system requires control data record
196 from the user program so that the ET 200SP distributed I/O system can operate the I/O
modules.
Reference
You can find additional information in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual and in the
STEP 7 online help.
22
Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD