Interrupts, error messages, diagnostics and system alarms
5.3 Alarms
5.3.7
H status
Requirements
The H status in the diagnostics frame supplies the IM 155-6 DP HF interface module only
when operated behind a Y link (e.g. IM 157) in DPV1 mode. This block can be passed over
during the evaluation of the diagnostics frame. The configuration is described in the following
section.
Structure of the H status
The following figure shows the structure of the H status of the IM 155-6 DP HF interface
module.
Figure 5-14
46
Structure of the H status
Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD