Related Manuals for Vanco VPW-280789
Summary of Contents for Vanco VPW-280789
- Page 1 HDMI® MATRIX SELECTOR SWITCH PRODUCT MANUAL Vanco Part Numbers: VPW-280789 (4X4) www.vanco1.com • 888.769.4156...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 FEATURES Vanco Powered by Wyrestorm HDMI Matrix Selector Switch allows 4 HDMI sources to be distributed to up to 4 displays simultaneously. VPW-280789 allows 4 sources to be displayed simultaneously on any display or a single source duplicated on multiple displays providing flexibility for the perfect solution. With an output bandwidth of 6.75 Gbps over HDMI, Vanco Powered by Wyrestorm Matrix Selector Switchers are capable...
-
Page 4: Product Images
PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) Vanco Powered by Wyrestorm HDMI Matrix Selector Switch unit • (1) 12VDC Power Supply •... -
Page 5: Connect And Operate
HDMI inputs. Note that high-speed HDMI cables are recommended for the distances that are required for each connection. 3. For power, plug in the source first, followed by the Vanco Powered by Wyrestorm Matrix Selector Switcher (power supply included), followed by each output connected. -
Page 6: Liability Statement
LIMITED WARRANTY With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of one year from the date of purchase. -
Page 7: Technical Support
4. If you are still encountering issues, attempt the “hot-plug concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. - Page 8 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 888.769.4156 fax: 630.879.9189 visit: www.vanco1.com...