General Tab - Vanco HDMX4K44 Product Manual

GENERAL TAB

This tab allows for customization of the matrix unit including disabling the beeping noise when switching, as
well as functions to reboot and powering on/off unit.
1. Select the RS-232 COM port (This can be found within your computer's Device Manager)
2. Connects the PC or computer to the matrix
3. Resets the unit to factory default settings
4. Reboots the unit
5. Enables or disables beeping sound when switching unit (check to enable)
6. Power On or Off the matrix unit, unchecking will put the unit into standby mode
7. Click to refresh device status
8. Click to clear device information
9. Device information display column
800-626-6445
9