PRELIMINARY
C
ONFIGURING
Point-to-Point Protocol (PPP) runs over ATM virtual circuits (VCs). From the
pages, configure parameters for communicating between the modem and the service provider
over the WAN
(page
the modem
(page
ATM sessions, select the sessions that you want to activate (see
1
Click
EasySession
2
Click
Edit
next to any
that port.
Megabit Modem 500L Installation Manual
PPP
OVER
36). Then, configure parameters for communicating between the LAN and
39). After setting up all appropriate WAN and LAN parameters for PPP over
on the
Main Menu
Port 1-3
to display the
ATM S
ESSIONS
to access the
EasySession
PPP Over ATM WAN Configuration
Chapter 6: Configuring Sessions
EasySession
page
43).
page.
page for
35