PRELIMINARY
Configuring the LAN
1
Click
EasySession
2
At the top of the
PPP Over ATM LAN Configuration
3
Do the following to configure the LAN:
Enter the
IP Address
10/100BASE-T LAN port. The IP address will not take effect, however, until the
modem is reset.
Select
DHCP Enable
automatically assign IP addresses to devices on the LAN. If you enable DHCP,
ensure that all devices on the LAN have the TCP/IP stack set to
automatically
Megabit Modem 500L Installation Manual
on the
Main Menu
to access the
page, click
EasySession
page.
and
IP Net Mask
if you want to enable the modem to act as a DHCP server to
(see
page
18).
EasySession
next to
Edit
LAN Configuration
(subnet mask) for the modem Ethernet
Chapter 6: Configuring Sessions
page.
to display the
Obtain an IP address
39