Setting Up The Pc To Request An Ip Address - PairGain 500L User Manual

Setting Up the PC to Request an IP Address

S U
ETTING P THE
You configure the Megabit Modem 500L using a PC connected to the 10/100BASE-T port.
The PC must be set to obtain an IP address automatically from the modem. The modem, as a
Dynamic Host Configuration Protocol (DHCP) server, provides an IP address to this PC
dynamically.
The following is an example of how to set up the PC using Microsoft
use an application other than Windows 95, refer to the appropriate operating system user
documentation.
1 .Open the Control Panel
shown at right.
2 In the
Network
Configuration
3 On the IP Address
4 Restart the PC.
18
PC
TO
window and double-click on the
dialog (shown below), double-click
tab (or highlight
TCP/IP
tab, select Obtain an IP address automatically,
R
EQUEST AN
Network
under the
TCP/IP
then click ).
Properties
Megabit Modem 500L Installation Manual
PRELIMINARY
IP A
DDRESS
® ®
Windows 95. If you
icon
then click OK .