Table of Contents
Advertisement
The Megabit Modem 500L is easy to install by:
•
attaching adhesive-backed feet
•
setting the MDI/MDI-X switch
•
connecting a cable from the modem to a PC or an Ethernet hub for LAN service
•
connecting a phone cord from the modem to a wall phone jack for DMT ADSL Internet
or other WAN application service
•
connecting a power cable to a local power outlet
Perform the installation on the following pages (see
page 6
to determine where to place modems). Use the installation kit parts listed below in
the installation procedures.
Part
Rubber adhesive-backed
feet (four)
Black cable
Grey cord
Power cable
Megabit Modem 500L Installation Manual
I
NSTALLING THE
Function
Attaches to the base of the modem.
Connects the modem 10/100BASE-T connector to the LAN through a hub
or to a PC NIC.
Connects the modem ADSL connector to the RJ-11 wall jack with DMT
ADSL service.
Connects the modem Power connector to the local power source. Power
supply optionally has a power cord. (See
page 9
for selection options.)
M
ODEM
"Location for Modem Installation" on
"Choose a Power Cable" on
3
11
Advertisement
Table of Contents
Troubleshooting
