PairGain 500L User Manual page 32

Saving the Configuration
Parameter
System Mode
TFTP parameters
TFTP Server IP Address
TFTP Server Net Mask
TFTP Server Path
Set time and date
Admin IP Address
PPP Over ATM WAN Configuration
Service Name
ATM VPI
ATM VCI
Login Name
Login Password
Chap Host
Address Translation
Address Assignment
IP Address
User Assignments (for PPP WAN)
Service Name
User's IP Address
24
Default Value Parameter
System Setup
PPP over ATM SNMP parameters
Enable trap sending
0.0.0.0 Trap Server IP Address
255.255.255.0 Trap Server Net Mask
blank field Trap Community String
blank field Get Community String
0.0.0.0 Set Community String
PPP Over ATM
PPP Over ATM LAN Configuration
blank field IP Address
0 IP Net Mask
0 DHCP
blank field Start IP Address
blank field Primary DNS
blank field Secondary DNS
Enabled Gateway
Dynamic Static NAT Entries (private, proxy, and remote)
0.0.0.0 IP Addresses
Ports
blank field Protocol
0.0.0.0
Default Value
Not enabled
0.0.0.0
255.255.255.0
public
public
private
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
0.0.0.0
0.0.0.0
192.168.0.1
0.0.0.0
0
UDP
Megabit Modem 500L Installation Manual
PRELIMINARY