If The Lcs Does Not Operate As You Want - Ricoh TC-IIR Operating Instructions Manual

Troubleshooting

If the LCS Does Not Operate as You Want

Problem
The red indicator is blinking.
The input tray does not go up
when the up button is
pressed.
3
The red indicator is lit.
46
Cause
Paper remains in the interme-
diate feeding section.
There is no paper loaded in
the input tray.
A sheet of paper remains in
the intermediate feeding sec-
tion.
The cover release lever is not
locked.
If the input tray does not move after 15 seconds, after eliminat-
ing the causes above, contact your service representative.
—
Solution
Remove the paper, and then
press the up button.
Load paper.
Remove the paper.
Lock the cover release lever.
Turn the power off, and then
back on. If the red indicator is
still lit, contact your service
representative.