Table of Contents
Advertisement
Troubleshooting
Poor Printing
Dirty Background
If the background of prints is dirty,
the drum unit might be dirty.
R CAUTION:
• If ink comes into contact with
your eyes, rinse immediately in
3
running water. For other symp-
toms, consult a doctor.
R CAUTION:
• Keep the ink or ink container out
of reach of children.
R CAUTION:
• If ink is ingested, induce vomiting
by drinking a strong saline solu-
tion. Consult a doctor immediately.
R CAUTION:
• If your skin comes into contact
with ink, wash the affected area
thoroughly with soap and water.
Note
❒ To avoid getting dirty background
prints when printing onto paper
smaller than the original image, se-
lect a suitable reduction ratio or
use larger print paper.
❒ When printing onto paper that
does not absorb ink well, the back-
ground of prints might get dirty. In
this case, lower the printing speed
or use Skip Feed mode to dry the
ink on the prints.
58
A
Open the front cover.
B
Pull out the drum unit.
Note
❒ For how to take out the drum
unit, ⇒ p.9 "Changing the
Drum Unit".
C
While pressing the drum lock, turn
the drum until you can see the trail-
ing edge of the master.
Advertisement
Table of Contents
