Turn On/Off Autostart; Autostart Now Enabled And Autostart Now Disabled; Error Log; Error - Eltek MultiCharger 1500 Description And Operating Instructions

Service menu
10.8

Turn on/off autostart

The "Turn on/off autostart" menu is used to enable or disable the automatic starting function
for battery charging in the battery-charging mode.

10.8.1 Autostart now enabled and Autostart now disabled

These are the sub-items of the "Turn on/off autostart" menu. They are used to enable or
disable the autostart function.
Enabling autostart means that the MC1500 (if switched on and in battery charging mode) will
begin the charging process as soon as a battery is connected, with no need for any other
instructions to be entered.
Disabling autostart means that the MC1500 (switched on and in battery charging mode) will only
begin the charging process after a battery has been connected and button 2 (Start/Stop) has
been pressed.
Default setting: autostart enabled
10.9

Error log

The last 10 internal and external errors are stored in the "Error log" and can be retrieved on
demand.

10.9.1 Error 0 - 9

This is a sub-item of the 'Error log' menu. It allows the retrieval of the last 10 internal or
external errors.
Error 9 is the most recent error, while error 0 is the oldest one in the memory. If over the course
of time more than 10 errors occur, the oldest one is always deleted from the memory.
This menu item also provides the option to clear all of the errors out of the log.
2280073 Rev.1 Page 42