Setting Of Operating Modes; Charging Pb; Charging Lio; Eps 12V Mode - Eltek MultiCharger 1500 Description And Operating Instructions

Service menu
10.1

Setting of operating modes

The 'Set mode' menu allows the setting and activation of the different operating modes of the
MC1500.
These settings should be made very carefully to avoid any potential damage to the vehicle
connected to the charger (e.g. connecting a charger in EPS 24V mode to a vehicle with a 12V
electrical system will cause damage to the vehicle).

10.1.1 Charging Pb

This is a sub-item of the "Set mode" menu. It is used to set the MC1500 to the charging mode
for lead-acid batteries. The functioning of this operating mode is described in more detail in
section 6.2.

10.1.2 Charging LIO

This is a sub-item of the "Set mode" menu. It is used to set the MC1500 to the charging mode
for lithium-ion Batteries. The functioning of this operating mode is described in more detail in
section 6.6.

10.1.3 EPS 12V mode

This is a sub-item of the "Set mode" menu. It is used to set the MC1500 to external power
supply mode. The functioning of this mode is described in more detail in section 6.8.

10.1.4 EPS 24V mode

This is a sub-item of the "Set mode" menu. It is used to set the MC1500 to external power
supply mode. The functioning of this mode is described in more detail in section 6.8.
The setting of the "EPS 24V" mode is only possible if it is already enabled (see section 10.2).

10.1.5 EPS autostart mode (Auto. start EPS)

This is a sub-item of the "Set mode" menu. It is used to set the MC1500 to external power
supply mode with automatic battery-voltage recognition. The functioning of this mode is
described in more detail in section 6.9.
2280073 Rev.1 Page 36