Autostart; Turn On/Off Autostart; Error Log; Error - Eltek MultiCharger 1500 Description And Operating Instructions

5.7

Autostart

The 'Autostart' menu lets you enable or disable the automatic starting function for battery charging in
battery charging mode.
5.7.1

Turn on/off autostart

This is a sub-item of the 'Autostart' menu and is used to enable or disable the autostart function.
Enabling autostart means that the MultiCharger 1500 (if switched on and in battery charging mode)
will begin the charging process as soon as a battery is connected, with no need for any other
instructions to be entered.
Disabling autostart means that the MultiCharger 1500 (switched on and in battery charging mode) will
only begin the charging process after a battery has been connected and button 2 (Start/Stop) has
been pressed.
Default setting: Autostart enabled
5.8

Error log

The last 10 internal and external errors to occur are stored in the 'Error log', which you are able to
access if necessary.
5.8.1

Error 0 - 9

This is a sub-item of the 'Error log' menu. This lets you call up any of the last 10 internal or external
errors to occur.
Error 9 is the most recent error to have occurred, while error 0 is the oldest one in the memory. If over
the course of time more than 10 errors occur, the oldest one is always deleted from the memory.
This menu item also gives you the option to clear all of the errors out of the log.
Page 31