Bahco TAWM Series Original Instructions Manual page 12

TAWM SERIES
2. AUTO BACKLIGHT screen is displayed.
3. Use UP/DOWN buttons to highlight ENABLE (factory default) or DISABLE selection.
4. Press ENTER button to accept selection and exit to Settings menu.
STD
TOGGLE BACKLIGHT SETUP
This function will allow user to enable or disable backlight toggle function. If toggle mode is disabled,
BACKLIGHT button turns on backlight and it automatically turns off after five seconds following any
last button press. If toggle mode is enabled, a BACKLIGHT button press will turn on backlight and it will
remain on until next BACKLIGHT button press.
1. From Settings menu, use UP/DOWN buttons to highlight TOGGLE BACKLGHT selection then press
ENTER button.
2. TOGGLE BACKLGHT screen is displayed.
3. Use UP/DOWN buttons to highlight ENABLE or DISABLE (factory default) selection.
4. Press ENTER button to accept selection and exit to Settings menu.
Note: Backlight will turn off when wrench powers down either by POWER button press or sleep time.
Note: If toggle backlight is enabled and backlight is on, backlight will remain on during and after
applying torque.
STD
SLIM
SLIM
VIBRATOR CONFIGURATION
This function will allow user to configure vibrator for On or Off when target is reached for preference
and/or battery power savings.
1. From Settings menu, use UP /DOWN
press ENTER button.
2. VIBRATOR CONFIG screen is displayed.
3. Use UP /DOWN buttons to toggle ON or OFF selection.
4. Press ENTER button to accept selection and exit to Settings menu.
STD
BATTERY TYPE SELECTION (ONLY ON SLIM WRENCHES)
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP /DOWN buttons to highlight BATTERY TYPE selection then press
ENTER button.
2. BATTERY TYPE screen is displayed.
3. Use UP /DOWN buttons to select the type of battery being used.
4. Press ENTER button to accept selection and exit to Settings menu.
Note: Wrench is configured for Alkaline battery shipped from factory. If Alkaline battery is replaced
with rechargeable Nickel-Metal Hydride (NIMH) or lithium, battery type should be changed so battery
level icon and LOW battery warnings function optimally. Battery life (REPLACE) will not be impacted,
however 50% and Low will be optimized to show most accurate linear discharge time.
buttons to highlight VIBRATOR CONFIG selection, then
SLIM
23